Hangar Doors of the Northwest
Professionals dedicated to the efficient hangar door installation and maintenance and repair.
Hangar door of Montana can assist with new project consulting, design, and engineering of hangar doors and the structural components that support them. We have full-service maintenance and fabrication facility.
[box borderradius=”3px” padding=”10px” color=”#164C8C”]
[row]
[column width=”one-half”]
Aircraft Hangar Doors
Architectural Hangar Doors
Agricultural Hangar Doors
Retrofit Hangar Doors
Livestock Hangar Doors
Commercial Hangar Doors
[/column]
[column width=”one-half”]
[/column]
[/row]
[row]
[column width=”one-half”]
Hangar Door Repair
We service
- Hydraulic doors
- Bifold doors
- Bottom or top rolling doors
Pricing
Inspections
Maintenance
Emergency Services
Service calls are handled on a time, material, and mileage basis.
Call for quote
Travel time is billed at $150.00 per hour and $2.50 per mile.
Our Company offers maintenance inspections on regular intervals.
Routine maintenance can prevent costly and catastrophic repair, that may cause and reduce or prevent downtime.
Our technicians will inspect, lubricate, and adjust hangar doors. We can provide detailed recommendations and estimates if additional work is needed.
Our company will keep detailed records of all maintenance and repairs performed, allowing our technicians to provide the best possible service economically. Your will receive a report checklist of work performed after each visit.
Our services include:
- Door installations or removal
- Adjustments
- Door and structure modifications
- Structural engineering
- Troubleshooting
- General maintenance and repair
- Motorizing
- Re cabling
- Roller replacement
- Weather stripping
[/column]
[column width=”one-half”]
Typical Maintenance
- Lubrication of bearings, hinge pins
- Adjust lifting cables
- Weather seal inspection and replacement
- Drive unit maintenance
- Limit switch adjustment
Common Issues
- Wheel failure
- Sprocket failure
- Power issues
- Sinking bottom rail
- Top guide roller failure
- Chain failure
- Low hydraulic fluid
- Dry bearings
- Door closure issues
It doesn’t matter who made your door we can source a replacement part of equal or better quality.
[/column]
[/row]
[row]
[column width=”one-quarter”]
EXPERIENCE
We have over 11,000 doors in operation and nearly 40 manufacturing locations across North America with over 300,000 square feet of fabrication capabilities.
[/column]
[column width=”one-quarter”]
QUALITY
Every PowerLift Door features a fully welded structure with no bolts to stretch and lossen over time. Our unique hinge system features bronze PTFE (Teflon) infused bushings with a service life measured in centuries.
[/column]
[column width=”one-quarter”]
RELIABILITY
Every PowerLift Door component is custom-designed to precisely suit your individual door size, use, and application.
[/column]
[column width=”one-quarter”]
LOCAL SERVICE
PowerLift manufacturing, sales, and service centers are located across North America. The professionals who build, deliver and install your door are also nearby
[/column]
[/row]
[/box]
[band variation=”default”]
[row]
POWERLIFT HYDRAULIC DOOR INSPIRATION
[/row]
[band variation=”alternative” backgroundimage=”https://www.acutechworks.com/metrolium/wp-content/uploads/2013/04/band_1.jpg” paddingtop=”20px” paddingbottom=”0px” inset=”yes”]
[row]
[column width=”one-half”]
HINGES
A silent, efficient world without grease
The core of each PowerLift hinge is a 100,000 psi rated stress proof shaft running within our patented greaseless bushing. Our hinge bushings consist of a high-grade steel and porous bronze matrix which is impregnated with a synthetic fluoropolymer (PTFE). PTFE has one of the lowest friction coefficients of any solid material without using any form of lubricant.
[/column]
[column width=”one-half”]
EXPERIENCE
The oldest and most trusted name in the industry
For over 25 years, we have held quality, professionalism, reliability, and service at the forefront of our efforts. With many industry patents to our credit and over 11,000 door systems installed, we continue to lead the industry in the technology and development of the best door and hydraulic systems for enclosures of virtually any size. Continuously developing and building these products since 1992 is a claim that only PowerLift can make. Our highly trained family of fabrication and support centers are strategically located across the continent and have extensive experience with enclosures of over 100’.
Contact us today to bring your new project to life or infuse added functionality into your existing structure.
(406) 892-4030
Follow Us
[/column]
[/row]
[box borderradius=”3px” padding=”10px” color=”#164C8C”]
[row]
[column width=”one-third”]
[/column]
[column width=”one-third”]
Contact us today to talk about your project!
[/column]
[column width=”one-third”]
[/column]
[/row]
[/box]
